Murata commercializes low-power Wi-Fi®/Bluetooth® combo module:Helping proliferate battery-powered IoT equipment

发布时间：2024-06-28 11:31
作者：AMEYA360
来源：Murata
阅读量：873

　　Murata Manufacturing Co., Ltd. (hereinafter, “Murata”) has developed and begun mass-producing the low-power compact wireless module “Type 2GF” (hereinafter “this product”) with built-in Infineon Technologies (hereinafter “Infineon”) “CYW43022” Wi-Fi®/Bluetooth®/Bluetooth® Low Energy combo chip.

　　With the expansion of applications in the IoT market in recent years, there has been a rise in IoT equipment with wireless communication functions. There has been a diversification in the different specifications wireless communication functions need to have depending on the application. For battery-powered devices, wireless communication functions are also being required to have lower power consumption.

　　In response to this demand, Murata has applied proprietary wireless design technology and product processing technology to develop this product with CYW43022 built in to have low power consumption capabilities. Because CYW43022 can maintain connectivity even when a host processor is in sleep mode due to its connectivity processing capability with the chip’s Bluetooth® stack and Wi-Fi® network offloading, the chip helps this product consume less power at the system level. Space was also saved on the module by using often space-occupying noise shields in a smaller size, which allowed us to make this product more compact.

　　Specifications

Murata commercializes low-power Wi-Fi®/Bluetooth® combo module:Helping proliferate battery-powered IoT equipment

（备注：文章来源于网络，信息仅供参考，不代表本网站观点，如有侵权请联系删除！）

上一篇：400mA, High Output Slew Rate: NOVOSENSE's NSOPA240x Series Cracks the Challenge of Resolvers

下一篇：ROHM Develops a Novel VCSELED™ Infrared Light Source that Combines Features of VCSELs and LEDs

在线留言询价

相关阅读
Murata Launches World’s First Inner Cavity-Structure Ultra-Low-Loss LCP Flexible Substrate, Achieving Dk below 2.0, Contributing to 6G Realization
Trade news

Murata Launches World’s First Inner Cavity-Structure Ultra-Low-Loss LCP Flexible Substrate, Achieving Dk below 2.0, Contributing to 6G Realization

　　Murata Manufacturing Co., Ltd announces the World’s First LCP (liquid crystal polymer) flexible substrate with an Inner Cavity structure, ULTICIRC, and has already begun mass production*. Murata’s proprietary design incorporates an Inner Cavity within the substrate to achieve a dielectric constant (Dk) below 2.0, dramatically reducing transmission loss.Cross-Section Image　　With 6G expected to leverage the FR3 (Frequency Range 3) band—roughly 7–24 GHz—substrates with minimal transmission loss are essential to enable high-speed, high-capacity communications at high frequencies. At the same time, demand is growing for thin, space-saving flexible substrates that support free-form mechanical design to meet the ongoing miniaturization of smartphones and communication equipment. Murata has provided LCP flexible substrates with excellent high-frequency characteristics, featuring a proprietary high-performance resin that eliminates spring-back and an adhesive-free, one-shot press multilayer lamination process; building on this expertise for 6G readiness, Murata has developed and launched ULTICIRC. Conventional flexible substrates faced the challenge that making them thinner resulted in increased transmission loss, but this product incorporates an Inner Cavity structure within the substrate, achieving a dielectric constant (Dk) below 2.0, which is significantly lower than Murata's conventional products, enabling both thin profiles and ultra-low transmission loss simultaneously.　　Furthermore, thanks to an adhesive-free proprietary manufacturing method and the excellent barrier properties of LCP, the Inner Cavity structure maintains high moisture resistance.　　For inquiries regarding this product, please contact us.
2025-12-18 16:00 阅读量：204
Murata develops integrated passive device for Semtech’s SX126X family
Trade news

Murata develops integrated passive device for Semtech’s SX126X family

　　Murata Manufacturing Co., Ltd. has developed a new integrated passive device (IPD) for use with the Semtech LoRa Connect™ SX126x family, which includes the SX1261, SX1262, and LLCC68 products. Using a proprietary low-temperature co-fired ceramic (LTCC) process, Murata has successfully replaced a series of discrete matching components of the SX1261/2 reference design with a single 2.00mm x 1.25mm size LTCC component.　　The IPD enables SX1261/2 radio designers to optimize for both size and performance using two dedicated parts. The LFB21892MDZ7F957 is optimized for US and European ISM bands, delivering the full output power for the US FCC bands. The LFB21892MDZ7F821 is optimized for Eurocentric designs that need to maximize the efficiency performance.　　“The Murata IPD offers the most efficient development path to realizing the full performance of the SX1261/2, featuring a miniaturized form factor that can significantly reduce board space,” says Arthur Kiang, Product Manager, RF Components, Murata. “The reduction in the number of matching components enables lower material costs and simplifies the design process, leading to shorter lead times. This integration also lowers the probability of soldering and manufacturing issues, as there is only one component to monitor in production.”　　“Semtech’s LoRa Connect™ SX126x family has become the trusted choice for LoRaWAN® networks and long-range IoT connectivity in applications from smart metering to industrial sensing,” says Carlo Tinella, product marketing director of wireless and sensing products at Semtech. “Murata’s IPD solution demonstrates the strength of our LoRa® ecosystem, helping radio engineers accelerate development while optimizing for both miniaturization and regulatory compliance. This partnership streamlines the path from design to deployment for millions of IoT devices being deployed globally.”　　Product samples are currently available, with mass production of the IPD commencing shortly.
2025-11-28 17:33 阅读量：359
Murata expands lineup of high cutoff frequency chip common mode choke coils in 0504-inch size for automotive high-speed differential interfaces
Trade news

Murata expands lineup of high cutoff frequency chip common mode choke coils in 0504-inch size for automotive high-speed differential interfaces

　　Murata Manufacturing Co., Ltd. (hereinafter ‘Murata’) has added a high cutoff frequency*1 product to its lineup of noise suppression components, the 0504-inch size (1.25 x1.0mm) chip common mode choke coils ‘‘DLM11C_HH2 Series’’ (hereinafter, ‘the product’), suitable for automotive high-speed differential interfaces such as LVDS*2, SerDes*3, USB, and HDMI. Murata has already started mass production of this product.　　*1High cutoff frequency: Reduces high-frequency noise.　　*2LVDS (Low Voltage Differential Signaling): An interface used for LCD panels.　　*3SerDes (Serializer/Deserializer): Circuits that convert between the serial and parallel signals in each direction.　　In recent years, the automotive market has seen multiple USB ports installed in each vehicle seat as interfaces for connecting smartphones and PCs, and data transfer speeds have increased from conventional USB 2.0 to Gbps-class USB 3.2. For these differential interfaces, common mode noise suppression is essential, and small common mode choke coils that support high-speed signals are required. In response, Murata developed this product using proprietary lamination technology to reduce high-frequency noise above 7.5 GHz in a compact 0504-inch size.　　Specifications　　*4AEC-Q200: One of the standards defined by the Automotive Electronics Council (AEC).
2025-11-10 17:12 阅读量：448
Murata Launches Digital Output SMD Pyroelectric Infrared Sensor for Low Power Applications
Trade news

Murata Launches Digital Output SMD Pyroelectric Infrared Sensor for Low Power Applications

　　Murata Manufacturing Co., Ltd has launched a digital output SMD pyroelectric infrared sensor, IRS-D200ST00R1, with low power consumption and is already in mass production.　　In recent years, the use of IoT technology in smart homes and smart buildings has increased convenience, safety, and power saving within living spaces and facilities. Because of this, the demand for wireless communication units equipped with human detection functions capable of sensing movement in real time is also increasing to realize more efficient and comfortable environments. One of the key technologies to enable the motion detection function is a pyroelectric infrared sensor. Products which communicate wirelessly require long-term stable operation with reduced battery replacement or charging, thus creating a strong need for pyroelectric infrared sensors that can detect human movement while extending battery life. Additionally, to increase design flexibility inside these products, space-saving measures are essential, driving demand for compact infrared sensors., space-saving measures are essential, driving demand for compact infrared sensors.　　In response, we developed this product using proprietary pyroelectric ceramic technology to achieve low power consumption and a compact size. Even when continuously operating the human detection function, power consumption is kept low, and the sensor includes an interrupt function that activates the microcontroller only when a change is detected, contributing to extended battery life. Furthermore, the compact size enables space-saving, and the adoption of the digital I2C interface simplifies design during development.　　The main features of this product include contributing to overall system power reduction through low power consumption and interrupt functionality, space-saving due to its small and low-profile SMD package, ease of design enabled by built-in amplifier and ADC with digital output (I2C), reduction of false detections and stable operation thanks to high signal-to-noise ratio and EMI noise resistance, Also enabling process cost reduction through reflow compatibility.　　Key specifications are a dual element electrode size of 0.08 × 0.02 inch (2.0 × 0.5 mm), an overall size of 0.24 × 0.24 × 0.10 inch (6.0 × 6.0 × 2.6 mm), typical sensitivity of 19.5 mV, element height of 0.065 inch (1.65 mm), field of view of ±55° horizontal and ±42° vertical, supply voltage from 1.8 to 3.3 V, typical current consumption of 8 µA, and an I2C interface.*
2025-09-15 14:09 阅读量：565
热门分类
盒子，外壳，机架 电缆，电线 电路保护 连接器，互连器件 开发套件 机电产品 嵌入式解决方案 风扇，热管理 光电元件 其它 无源元件 电源 半导体 传感器，变送器 测试与测量
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
CDZVT2R20B ROHM Semiconductor
MC33074DR2G onsemi
RB751G-40T2R ROHM Semiconductor
TL431ACLPR Texas Instruments
BD71847AMWV-E2 ROHM Semiconductor
型号 品牌 抢购
IPZ40N04S5L4R8ATMA1 Infineon Technologies
TPS63050YFFR Texas Instruments
STM32F429IGT6 STMicroelectronics
BU33JA2MNVX-CTL ROHM Semiconductor
ESR03EZPJ151 ROHM Semiconductor
BP3621 ROHM Semiconductor
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
原厂授权品牌
更多授权品牌>>
资讯排行榜
  • 周排行榜
  • 月排行榜

相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年，现 有超过3500家优质供应商，收录600万种产品型号数据，100 多万种元器件库存可供选购，产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等，为广大客户提供一站式购 销服务。

请输入下方图片中的验证码：

验证码